A water bath is laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. All water baths have a digital or an analogue interface to allow users to set a desired temperature. Utilisations include warming of reagents, melting of substrates or incubation of cell cultures. It is also used to enable certain chemical reactions to occur at high temperature. Water bath is a preferred heat source for heating flammable chemicals instead of an open flame to prevent ignition. Different types of water baths are used depending on application. For all water baths, it can be used up to 99.9 °C. When temperature is above 100 °C, alternative methods such as oil bath, silicone bath or sand bath may be used.
Video Laboratory water bath
Precautions
- It is not recommended to use water bath with moisture sensitive or pyrophoric reactions. Do not heat a bath fluid above its flash point.
- Water level should be regularly monitored, and filled with distilled water only. This is required to prevent salts from depositing on the heater.
- Disinfectants can be added to prevent growth of organisms.
- Raise the temperature to 90 °C or higher to once a week for half an hour for the purpose of decontamination.
- Markers tend to come off easily in water baths. Use water resistant ones.
- If application involves liquids that give off fumes, it is recommended to operate water bath in fume hood or in a well ventilated area.
- The cover is closed to prevent evaporation and to help reaching high temperatures.
- Set up on a steady surface away from flammable materials.
Maps Laboratory water bath
Types of water bath
Circulating Water Baths
Circulating the water baths (also called stirrers ) are ideal for applications when temperature uniformity and consistency are critical, such as enzymatic and serologic experiments. Water is thoroughly circulated throughout the bath resulting in a more uniform temperature.
Non-Circulating Water Baths
This type of water bath relies primarily on convection instead of water being uniformly heated. Therefore, it is less accurate in terms of temperature control. In addition, there are add-ons that provide stirring to non-circulating water baths to create more uniform heat transfer.
Shaking Water Baths
This type of water bath has extra control for shaking, which moves liquids around. This shaking feature can be turned on or off. In microbiological practices, constant shaking allows liquid-grown cell cultures grown to constantly mix with the air.
Additional images
See also
- Thermal immersion circulator
- Heated bath
- Hot plate
- Sand bath
- Oil bath
References
Source of the article : Wikipedia
0 Comments